The HI-PE Multi Zone is a high performance walk-through metal detector which exceeds all International Security Standards.
A“height on person”display actually indicates,by means of illuminated LED’s, the position of the weapon on the person. The location zones are not fixed, as in the case of metal detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution.
The panels are washable and will not lose their shape even in humid conditions; they are also equipped with shock absorbent edges to protect it against damages.
HI-PE Multi Zone can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a mains failure.
A Photocell transit count, in option, allow counting of the number of people passing through the metal detector.
System Advantages
- Complete Security Detection
- Highly Visible Double Display
- Provides Single or Multiple Location of Weapons in Transit
- Very High Speed of Detection
- High Immunity to External Interferences
- Direct Selection of the International Security Standards
- High Reliability
- Local or Remote Programming with Networking Capabilities
Technical Data
Main features
- Adjustable sensitivity with a wide range of settings.
- International Standards: immediate selection of International Security Standards.
- High detection speed: up to 45 feet per second.
- Very high immunity to both electrical and mechanical interference.
- Programmable operation controlled by microprocessor
- Programming: via built-in keypad and RDU or RS232/RS485 serial connection to PC or computer network.
- Programming access protected by a mechanical lock and two alphanumeric passwords.
- Cable-free automatic synchronisation between two or more Metal Detectors at a minimum distance of 2 inches from each other.
- High-integration professional electronics and maximum reliability.
- Control unit incorporated into the detector.
- No need for initial or periodic calibration.
- Easy maintenance: the control unit can be replaced within one minute.
- Color: light grey RAL 7040
Alarms
Visible signals:
- Multi-zone display bar for "height on person" localization.
- High intensity display.
- Green and red signals.
- Signal proportional to the mass of the object detected.
Audible signals:
- High acoustic intensity alarm signal.
- Volume and tone of alarm signal can be programmed.
- Steady tone or tone length proportional to the mass of the object detected.
Certification and Conformity
- Harmless to wearers of pacemakers or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar).
- Conforms to the FAA "3-Gun-Test" standard and to the NILECJ-0601-00 standards for all security levels.
- Satisfies EC regulations and international standards relating to electrical safety and electromagnetic compatibility (EMC).
Installation Data
- Power Supply:
- 115 / 230 VAC, ±15%, 45-65 Hz, 30 VA MAX
- Inputs:
- RS-232C interface for the connection with a terminal, a computer or an external modem
- RS-232C interface for the network connection with other CEIA metal detectors
- Temperature and relative humidity: from -15°C to +50°C; from 0 to 95% (without condensation)
Accessories / Options
- Photocell transit count.
- Metal test samples.
- Back-up batteries with 45 minute or 8 hour independent operation capability.
- Random Alarm Generator
- Network Mangement
|
|
