Ceia Metal Detectors Online Store

The CEIA SMD600 Multi Zone is a new-generation ultra-high sensitivity walk-through metal detector designed to satisfy the strictest security requirements, especially in penitentiaries and other applications where the detection of extremely small metal masses is required, even if hidden in body cavities.

It meets all International Security Standards currently adopted in public and private installations.

The SMD600 Multi Zone is characterised by very high immunity to electrical interference in the surrounding environment as well as mechanical vibrations; as a result, it can be installed in those environments where the standard Metal Detectors could not be installed before.

A full-height light bar displays the horizontal location of the detected metal masses in transit. This results in rapid identification of threat and a reduction, or elimination, of manual searches.

The detector's control unit is incorporated into the structure of the device, and is available in the standard (IP20) and anti-vandalism (IP55 in stainless steel) versions.

Access to programming is protected both by a mechanical lock and by two alphanumeric passwords. The Metal Detector's sensitivity does not depend on the speed of transit, and thus makes for a high flow rate.

The SMD600 Multi Zone is manufactured using the most advanced electronics technology, conforming to ISO 9001 quality control procedure standards.

Technical Data

Main features

Adjustable sensitivity with a wide range of settings.
International Standards: immediate selection of International Security Standards.
High detection speed: up to 45 ft/second.
Very high immunity to both electrical and mechanical interference.
Programmable operation controlled by microprocessor.
Programming: via built-in keypad and RDU or RS232/RS485 serial connection to PC or computer network.
Programming access protected by a mechanical lock and two alphanumeric passwords.
Cable-free automatic synchronisation between two or more Metal Detectors at a minimum distance of 2 inches from each other.
High-integration professional electronics and maximum reliability.
Control unit incorporated into the detector.
No need for initial or periodic calibration.
Easy maintenance: the control unit can be replaced within one minute.
Color: light grey RAL 7040

Alarms

Visible signals:

Multi-zone display bar for. "height on person" localization.
High intensity display.
Green and red signals.
Signal proportional to the mass of. the object detected.

Audible signals:

High acoustic intensity alarm signal.
Volume and tone of alarm signal can be programmed.
Steady tone or tone proportional to the mass of the object detected.

Certification and Conformity

Harmless to wearers of pacemakers or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar).
Conforms to the FAA "3-Gun-Test" standard and to the NILECJ-0601-00 standards for all security levels.
Satisfies EC regulations and international standards relating to electrical safety and electromagnetic compatibility (EMC).

Installation Data

Power Supply:

115 / 230 VAC, ą15%, 45-65 Hz, 30 VA MAX Inputs:
RS-232C interface for the connection with a terminal, a computer or an external modem
RS-232C interface for the network connection with other CEIA metal detectors Temperature and relative humidity:
from 5°F to 158°F; from 0 to 95% (without condensation)

Accessories / Options

Photocell transit count.
Metal test samples.
Back-up batteries with 45 minute or 8 hour independent operation capability.